Everything you need to
know about Faux Wood Blinds

• How-to-Measure

  • 2 simple steps to get started

    Our instruction guides make it easy to take accurate measurements and get the right fit. To make it even easier, use the following tools:

    ---

    

    Step 1: Download and print our worksheet to record your window measurements

    Step 1:

    Download and print our worksheet to record your window measurements

    Review the instructions below for your specific product before measuring.

    

    Step 2: Get a metal tape measure

    Step 2:

    Get a metal tape measure

    Carefully record your measurements to the nearest 1/8".

    Download Worksheet

• How-to-Install Manuals & Videos

  • Download Installation Manuals

    Motorized Cordless Corded

• Faux Wood Blinds FAQs

  • • Why is the headrail a different color than the slats in my wood blind?

      • Levolor uses four different headrail colors designed to coordinate with over thirty different slat finishes. After the valance is installed, the headrail will be covered and no longer visible.

    • How can I get my wood blind restrung?

      • For our custom Faux and Real Wood blinds, we recommend that you contact customer service to see if a repair to restring is available. If so, Customer Service will provide the repair costs and generate a repair order number.

    • Can I order additional slats for my wood blind?

      • Additional wood slats are available for purchase. To order, contact your local Levolor blind retailer or Levolor customer service. Before you order, take a minute to measure your blind. You’ll need to know the width of the slat, as well as the route hole measurements, starting from the left of the blind working to the right.

    • My cordless Wood Bind is not even, how can I adjust?

      • Cordless blinds feature skew adjusters located on the underside of the headrail.

        • 
        
        

        To level the blind:

        • Locate the lowest side of the bottom rail and raise it by turning the corresponding skew adjuster clockwise with a screwdriver while continuing to lift and support the bottom rail in a leveled position.

          

          NOTE: Turn the skew adjuster that is on the same side as the low end of the bottom rail. Privacy route product will have skew adjusters on both the front and back of the head rail. Both must be adjusted to raise the bottom rail evenly.

        
        

        Adjusting the Cordless Blind Height If the blind height is too long:

        • Lift the bottom rail and turn all skew adjusters clockwise to raise the entire bottom rail to the desired height.

          NOTE: There is an adjustment range of approximately 1¼”.

    • My cord consolidator has broken away, how can I restring?

      • Cord Stop

        • This component breaks apart with minimal pressure, should a child or a pet become entangled in the top lift cords.
        • It also acts as a stopper to prevent inner cords from being pulled through the blind which can also create potential entanglement.

        Reassembly of Cord Stop

        • Reinsert any loose cords into the top notches of the cord stop. There is a notch on each side.
        • Line up the two halves of the cord stop and snap the pieces back together.
        

        Two Cords

        

        Four Cords

    • How do you clean a Faux Wood Blind?

      • Visit our cleaning and care page.

• Remote Guides

  • Download Remote Manuals

    Premium 6-Channel Remote Basic 3-Channel Remote

• Tech Specs

  • To view more technical information on Faux Wood Blinds such as fabric comparison, parts and components, and cleaning and care download the Technical Guide below.

    • Download Tech Guides

      Tech Guide

• Warranty

  • We are committed to delivering reliable products that stand the test of time and back each one up with a Limited Lifetime Warranty.

    ---

    Limited Lifetime Warranty

    LEVOLOR® extends a limited lifetime warranty to the original residential retail purchaser only if the product was properly installed and remains in the original window. The product is covered against manufacturing defects, i.e., a flaw in the product design, materials, or workmanship that causes the product to no longer function and has a limited lifetime warranty. Limited warranty extends for the life of the product defined as 10* years.

    
    

    * 25 years for shutters; 5 years for motorized operating system components (excluding remote); 3 years for vertical vinyl vanes.

    
    

    • Full Warranty Details

      Custom Blinds & Shades

      (Download and save warranty card with your proof of purchase)