Naturals

• Spot-Cleaning/Stain Removal - Use warm water and a mild soap, like Woolite® or Scotchgard®, if needed.
  Avoid contact with window cleaning products as they may discolor your shade. Do not use solvents or abrasive solutions to clean the shade.
• Dusting - Use a feather duster for regular cleaning.
• Forced Air - Blow away dirt and debris using clean, compressed air.
• Color Variation - LEVOLOR Natural Shades are created using natural products. By nature, no two strands of grass, bamboo, or reeds are exactly the same, making every shade truly unique. Slight color, grain, and texture variations should be expected and cherished for their unique beauty.
• Stretching and Shrinking - Natural woven fabric will be affected by temperature and humidity. Shipping and handling may cause a slight change in shade lengths, and slight shrinkage, stretching and warping may occur over time.
• Note - Material stretching may be more noticeable on inside mounts.

Romans

• Dusting - Use a feather duster for regular cleaning.
• Vacuuming - Use a low-suction vacuum with a brush-type cleaner attachment; stroke lightly over the shade to clean.
• Spot-Cleaning/Stain Removal - Dampen sponge with lukewarm water and dab the spot if our shade becomes stained.
  Avoid contact with window cleaning products as they may discolor your shade. Do not use solvents or abrasive solutions to clean the shade.

Cleaning Procedures - Sheer Shadings are made of 100% polyester, which means they are inherently durable and resilient. However, care must be taken to avoid wrinkling the fabric, particularly where the vanes meet the facings.

• Dusting - Use a feather duster for regular cleaning.
• Vacuuming - Use a low-suction vacuum with a brush-type cleaner attachment; stroke lightly over the shade to clean.
• Forced Air - Blow away dirt and debris using clean, compressed air.
• Spot-Cleaning - Do NOT spot-clean sheer shadings.
• Professional Cleaning
  Injection/Extraction Cleaning - Call a professional blind cleaning company for cleaning service, which injects a cleaning solution into the fabric and extracts the dirty solution at the same time. The service is typically performed at home so you do not need to remove your window treatments. A dry method of injection/extraction is required for light-dimming fabrics. Never immerse the headrail in the solution.
• Ultrasonic Cleaning - Sheer Shadings can be ultrasonically cleaned by a professional with the exception of light-dimming fabrics.
  • Specify that a mild detergent solution be used.
  • Never immerse the headrail in the solution.
  • Dry the shading completely in the lowered position.
• Electrostatic Cleaning - Do not use electrostatic wipes on any sheer shadings.
• A Note About Fabrics - As with all textiles, Sheer Shading fabrics are subject to some variations. Slight wrinkling, puckering, or bowing is inherent to this textile product and should be considered normal, acceptable quality. These characteristics are not usually visible from the front or rear but may be visible from a side angle. Precautions should be taken to reduce exposure to harsh environmental elements, such as salt air. Continuous exposure through open windows and doors will accelerate the fabric deterioration.

Fabric

• Dusting - Use a feather duster for regular cleaning.
• Vacuuming - Use a low-suction vacuum with a brush-type cleaner attachment; stroke lightly over the product to clean.
• Spot-Cleaning/Stain Removal - Use warm water and a mild soap, like Woolite® or Scotchgard®, if needed.
  Check color fastness first by cleaning an inconspicuous area of the vane. Do not machine wash or dry clean.

Vinyl

• Spot-Cleaning/Stain Removal - Use warm water and a mild soap, like Woolite® or Scotchgard®, if needed.
  Dry with a cloth to avoid water marks. Do not use abrasive or strong cleaners.

Cleaning Procedures - You can clean the blind hanging in place or you can take it down. By tilting the slats down, but not quite closed, you will be able to clean most of the top surface of each slat. You may use a soft, lightly dampened cloth to clean your NuWood blinds.
Do not use water, solvents or abrasive solutions to clean the blind.

Blinds with Privacy Route - Slats can be removed for cleaning. Slide out the slat, wipe clean, and return to its original position. If a light gap occurs for any reason, simply flip the slat over to cover or close the gap.

• Dusting - Use a feather duster for regular cleaning.
• Vacuuming - Use a low-suction vacuum with a brush-type cleaner attachment; stroke lightly over the blinds to clean.
• Forced Air - Blow away dirt and debris using clean, compressed air.
• Spot-Cleaning/Stain Removal at Home - You may use a soft, lightly dampened cloth to clean your Faux Wood blinds.

Cleaning Procedures - You can clean the blind hanging in place or you can take it down. By tilting the slats down, but not quite closed, you will be able to clean most of the top surface of each slat. In very dusty environments, you may use a non-wax furniture polish to clean blinds.
Do not use water, solvents or abrasive solutions to clean the blind.

Blinds with Privacy Route - Slats can be removed for cleaning. Slide out the slat, wipe clean, and return to its original position. If a light gap occurs for any reason, simply flip the slat over to cover or close the gap.

• Dusting - Use a feather duster for regular cleaning.
• Vacuuming - Use a low-suction vacuum with a brush-type cleaner attachment; stroke lightly over the blinds to clean.
• Forced Air - Blow away dirt and debris using clean, compressed air.