LEVOLOR stock blinds and shades can be custom cut in store by an associate, so you can get a better fit, light control and privacy.
Cordless Cellular Shades are a versatile window covering. Energy efficient cells help insulate rooms by acting as thermal barriers, trapping air and improving your home’s energy efficiency. This can help lower your energy bills in both summer and winter.
Cells act as a thermal barrier for your window.
Easy to use and provides a safer option.
Soft, durable and easy to clean in two light control levels.
Measure exact distance between inside surfaces of window frame at the top, middle, and bottom, and use the narrowest width. Do not make any width deductions. For custom shades, the factory will automatically deduct 3/8" from the shade width; for Stock shades, a 1/2" deduction will be taken on the entire shade.
Measure exact distance from inside surface at top of window to sill. If you prefer shade not to touch sill, deduct 1/4". If there is no sill, measure height to point where shade is to reach.
Measure exact distance between the outermost points where the shade is to be placed. This measurement should overlap each side of window frame by at least 1-1/2". Factory makes no deduction from your shade width dimensions.
Measure exact distance from where top of shade will be located to top of sill. If there is no sill or if shade is to overlap window frame, measure to point shade is to reach
|Allow Some Overlap|
For outside mount applications allow the shade to overlap 1-1/2" to 3" on the sides, top and bottom of the window.
You must add the overlap to your measurement; LEVOLOR does not add width or height for overlap on Outside Mounted shades.
(Depth x Height)
(Side, Back or Top Mount)
|Flush Mount Headrail
|Corded Double Cell||2-1/8" x 9/16"||5/8"||2-1/2"|
|Corded Single Cell||1-7/8" x 9/16"||5/8"||2-1/4"|
|Cordless and Continuous Cordloop||1-7/8" x 1-3/8"||1/2"||2-1/8"|
|Stock Cordless||3/4" x 1-1/2"||5/8"||1-7/8"|
Use the above chart to verify that you have adequate window depth for mounting.
NOTE: If flush mount is desired, the headrail will not extend past the window frame into the room. Consider headrail size and brackets when installing flush mount.
|Width||Up to 36 in.||Greater than 48"|
|B. Mounting Brackets||2||3|
|C. #6 Screw x 1 1/4 in.||4||6|
Remove these parts packed in the headrail. Quantity varies with shade size.
Pre-drill wood frame if necessary.