LEVOLOR offers a beautiful selection of cordless Visions Faux Wood styles in durable finishes and textures. The design of our cordless control creates a clean profile across all our windows and makes it easy to lift and lower your blinds without dangling cords. Available with standard slats, LightMaster™ and decorative tapes
2" Real Wood in Reclaimed Natural with LightMaster, cordless control, and Contemporary style package.
2" Real Wood in Gray Oil, cordless control and Traditional style package.
Available in all Visions Faux Wood finishes.
Reflects the fine detailing of architectural accents in your home.
Shown here in Cherry.
A streamlined silhouette for a polished look.
Shown here in American Walnut
Provides lasting value at an economical price. Available in select 2" finishes.
Shown here in White
LEVOLOR has cordless Visions Faux Wood blinds in rich finishes and textures.
The design of our Cordless control creates a clean profile across all our windows and makes it easy to lift and lower your blinds without dangling cords.
Lift and lower your blinds using cords accented by unique LEVOLOR tassels.
Enhance your privacy with more light-blocking control or select standard slats.
Our exclusive LightMaster option eliminates route holes, blocking more light and increasing privacy. Now available with Cordless control.
Slats feature standard route holes. Now available with Cordless control.
Personalize your blinds and unique accents.
Customize your blinds with a selection of coordinating colors and patterns. Now available with Cordless control.
Measure exact distance to the nearest 1/8" between inside surfaces of window frame at the top, middle, and bottom, and use the narrowest width. Do not make any width deductions. Factory will make the appropriate deductions.
Measure exact distance to the nearest 1/8" from inside surface at top of window to sill at the left, middle and right and use the longest height. If you prefer blind not to touch sill, deduct 1/4". If there is no sill, measure height to point where blind is to reach.
|Standard Factory Adjustments From Ordered Width|
Measure exact distance to the nearest 1/8" between the outermost points where the blind is to be placed. For optimum light control, this measurement should extend 3/4" beyond the window opening on each side (or 1-1/2" for the entire width).
Measure exact distance to the nearest 1/8" from where top of blind will be located to top of sill. If there is no sill or if blind is to overlap window frame, measure to point blind is to reach.
|Allow Some Overlap|
For outside mount applications allow the blind to overlap 1-1/2" to 3" on the sides, top and bottom of the window.
You must add the overlap to your measurement; LEVOLOR does not add width or height for overlap on Outside Mounted blinds.
|Standard Factory Adjustments From Ordered Width|
|Blind Width||No adjustment||No adjustment|
|Valance||1" added||No adjustment|
NOTE: Whether you have a protruding or flush mount application is entirely dependent on the available depth of your window.
(Height x Depth)
(Side, Back or Top Mount)
Headrail Flush Mount
Valance Flush Mount
|1" Slat Size||1" x 1-1/2"||1/2"||1-3/4"||2-5/8"|
|2" Slat Size||1-1/2" x 2-1/4"||3/4"||2-1/2"||3-1/2"|
|2-1/2" Slat Size||1-1/2" x 2-1/4"||1-1/4"||3"||3-1/2"|
There are two types of brackets used for real and faux wood blinds installation. Bracket appearance and quantity may vary depending on size and headrail length.
Always use two mounting screws per bracket.
Box brackets (one used at each end)
Center support bracket (spaced evenly between ends)
Preparing box brackets for installation:
If your blinds include optional extension brackets or spacers, you will need to use them to determine mounting hole locations in Steps 3 and 4.
Align the holes in the box bracket with the desired set of small holes in the extension bracket, as shown, and temporarily attach the brackets together using two self-tapping screws per bracket. Use the installation screws shipped with your blinds and #8 drywall anchors (not included) to attach the extension brackets to the wall before final installation of the box bracket to the extension bracket.
NOTE: If the width of the slats on your blinds is greater than 2", then the plastic spacer must be used as shown to allow for clearance between the blinds and the window. Blinds with slats wider than 2" will not function properly without the spacer.
Example: Installation in a wood window frame using the included screws.
Use two screws per bracket. Drill pilot holes using a 1/16" drill bit. Depending on the installation location, box brackets can be attached using the top, back, or side holes. Continue to Step 5.
Example: Installation in drywall using #8 drywall anchors and the included screws.
Use two screws per bracket.
Continue to step 5.
NOTE: Some styles may have the hold-down pins built into the bottom rail.
Find the valance clip location indicators on the backside of the valance which say "Clip Here."
For outside mounts:
|2-1/2" AND 2" VISIONS™ FAUX WOOD|
|Corded - Same Side Lift Controls||N/A||N/A||N/A||N/A|
|Corded - Opposite Side Lift Controls||11-1/2"||96"||10"||120"|
|Corded - Opposite Side Lift Controls with Tapes||13-1/4"||96"||10"||120"|
|Center Tilt, No Lift Control||9"||11-3/8"||8"||120"|
|Center Tilt, No Lift Control with Tapes||9"||13-1/8"||8"||120"|
|No Tilt or Lift Control||7-1/4"||8-7/8"||8"||120"|
|No Tilt or Lift Control with Tapes||7-1/4"||8-7/8"||8"||120"|
See price grids for exact limitations.
|Item||Descriptions||Real Wood Drawing #||Valance™ & Visions™ Drawing #|
|1||1" Real Wood Valance||SX###012||n/a|
|2||2" and 2-1/2" Contemporary Valance||SX###013||SG###112|
|3||2" and 2-1/2" Traditional Valance||SX###014||SG###113|
|4||2" Classic™ Value Valance||SX###016||L25P0108|
Valances greater than 96" wide will be spliced.
Stacking dimensions are approximate.
|2-1/2" Visions™||2" Visions™|
|Sandblasted Ultra White||12067108*|
*Available in Classic™ Value style package.
A LEVOLOR exclusive for wood blinds designed to enhance your décor at no additional charge. Available on 2" and 2-1/2" blinds only.
May specify a valance greater than ordered headrail width. Maximum total valance width is 144". Valance greater than 96" will be spliced. Must be requested at time of order.
For installations requiring additional space between the blind and the mounting surface.
Hold-down brackets prevent blinds from swaying. They can be sill mounted, face mounted or mounted inside the frame. Recommended for French doors and in windows subject to wind exposure. Must be requested at time of order.
Maximum total valance width is 144". Valance greater than 96" will be spliced.
Choice of control position is available. Tilter left, lift cord right is the standard position. You may choose to reverse the standard position. Grouped controls, both tilt and lift controls on the same side, available on Real Wood.
Available in place of cord tilt. Wand tilt standard for 1" Real Wood and Cordless blinds.
Traditional control not available on Cordless and 1" Real Wood blinds.
Edge route design provides tighter closure to minimize light for increased privacy and security. Slats can easily be removed for cleaning. Not available on 1" blinds or blinds with decorative tapes.
The design of our Cordless control creates a clean profile across all of your windows and makes it easy to lift and lower your blinds without dangling cords. not available on 1" Real Wood or Classic™ Value.
Allows access to air conditioners, window cranks, etc. Side cutouts are available. A diagram may be required. Not available with cordless control.
Provides the flexibility of raising one blind while keeping the other lowered. Two or more blinds on one headrail are available up to a total maximum width of 144". Innerspace is 1/2" between blinds. Horizontal slat alignment not guaranteed. If three blinds are chosen, middle blind will have cordless operation.
Accent your blinds and coordinate with your upholstery and textiles. Available in place of standard braided ladders. Blinds with cloth tapes will have traditional route holes. Not available with LightMaster™.
2-1/2" slat size—1-1/2" or 1/2" wide tape
2" slat size—1-1/2" or 1/2" wide tape
1" slat size—1/2" wide tape
2-1/2" slat size—1-1/2" wide tape
2" slat size—1-1/2" wide tape
|Nantucket Stripe Mink||01237|
|Modern Scroll Sand||NU008|
|Modern Scroll Mink||BR002|
Note : All cornice measurements are taken on the inside (non-decorative) face as shown below.
|MOUNT CODE||DUST COVER OPTION||INSIDE RETURN LENGTH OPTION||BRACKET TYPE||APPLICATION|
|A||Standard||2-5/8"||Slotted Bracket||LEVOLOR 2" Wood blinds only|
|B||Standard||4-1/2"||Slotted Bracket||Common Over Verticals|
|C||Standard||6"||Slotted Bracket||Common Over Verticals|
|D||Standard||Any Length: Minimum 1-1/2"
|E||N/A||Any Length: Minimum 3-3/4"
|F||N/A||Any Length: Minimum 5-1/2"
|Adjustable Long Bracket||Any|
|G||N/A||2-5/8"||Clip-on||LEVOLOR 2" blinds only|
|MOUNT CODE||BRACKET TYPE||APPLICATION|
|H||Clip-on||LEVOLOR 2" blinds only|
LEVOLOR® extends a limited lifetime warranty on the enclosed product to the original residential retail purchaser only if the product was properly installed and remains in the original window.
The product is covered against manufacturing defects (i. e., a flaw in the product design, materials or workmanship that causes the product to no longer function) and has a limited lifetime warranty. Lifetime warranty extends for the life of the product as defined by category below:
|Product||From Date of Manufacture|
|Cellular Shades||10 years|
|Roman Shades||10 years|
|Roller Shades||10 years|
|Banded Shades||10 years|
|Natural Shades||10 years|
|Panel Track Shades||10 years|
|Real Wood Blinds||10 years|
|Faux Wood Blinds||10 years|
|Metal Blinds||10 years|
|Sheer Shadings||10 years|
|Shutters||25 years Limited Lifetime|
|Vertical Blinds||10 years (with the exception of vertical vinyl vanes)|
|Vertical Vinyl Vanes||3 years|
|Soft Vertical Blinds||10 years|
Operating System From Date of Manufacture:
|Motorization components (with the exception of the remote)||5 years|
Normal wear and tear
Any product that fails due to:
Any product that, with the passage of time, exhibits:
Natural material (including, but not limited to wood, grass, jute, reeds) products that have:
Costs associated with:
In the event there are multiple blinds/shades in the same room, only the defective blind/shade will be replaced.
If damage occurred during shipping, call 1-800-538-6567 and report within 14 calendar days of delivery or you may be denied credit for your damaged product.
For online product-specific trouble shooting information, refer to www.LEVOLOR.com. If you suspect this LEVOLOR® product has a manufacturing defect in materials or workmanship:
Any unauthorized returns will not be accepted.
THIS SHALL BE YOUR SOLE REMEDY UNDER THIS LIMITED WARRANTY
If this LEVOLOR® product is found to have a manufacturing defect in materials or workmanship, we will (at our discretion) do one of the following:
Colors vary from lot to lot and may not exactly match sample swatch or previous purchases
Discontinued items or color selections will be replaced with the closest equivalent current product
This limited lifetime warranty gives you specific legal rights, and you may have other rights, which vary from state to state/province to province. Some states/provinces do not allow limitations on how long a warranty lasts, so the above limitations may not apply to you.
No agent, representative, dealer, or unauthorized employee has the authority to increase or alter the obligation of this warranty. This limited lifetime warranty supersedes any previous versions.