feedback

knowledgebase and FAQs

category: wood cornice (3 results)



  1. How do I adjust my returns if they are too short or long?
    Adjust the universal hardware as per the installation instructions.
  2. What do I do if the top corners are not flush?
    Adjust return up and down to even. Ensure plastic insert has been pushed to bottom of groove using a thin long screwdriver. You may also add an extra insert at the top of the groove.
  3. Can I change the finish on my cornice?
    Cornices are 100% basswood. Lightly sand all surfaces and follow paint/stain manufacturer's instructions. (This does void all warranties)
 
close

We'd like to hear from you. Choose from the following:

 

If you require immediate assistance or product support,
please contact our customer service department.