feedback

How do I install a friction shim/clip for my cordless shade?

A friction shim/clip should only be installed in a shade that needs additional friction or if the blind is rising up from the bottom. To install the friction shim/clip, please see instructions below:

Installing friction shim/clip

  1. Lift blind to open position
  2. Remove shade from window
  3. Install 1 shim/clip per shade as shown in diagram. Push shim/clip until it "snaps" in place.
  4. If the shade still rises, an additional friction shim can be added to the opposite side.
  5. If the shade still rises after installing friction shims on opposite sides, the shade needs to be repaired. Contact customer service for a return authorization number.

view diagram

Categories

 
close

We'd like to hear from you. Choose from the following:

 

If you require immediate assistance or product support,
please contact our customer service department.