My tilt chain is not facing the room, how do I fix this?

The tilt chain will only face one way and when the headrail is attached the wrong way, it will cause the tilt chain not to face the room. To have the tilt chain face the room, please follow the steps below:

  1. First, remove all vanes if attached.
  2. Next, remove headrail and turn headrail around so the controls are on the opposite side.
  3. Finish by attaching vanes.



We'd like to hear from you. Choose from the following:


If you require immediate assistance or product support,
please contact our customer service department.