feedback

How do I replace my cordloop mechanism?

  1. Gather the pleats together and hold the bottomrail to the headrail.
  2. Flip the shade so that the headrail is resting on your lap, and the bottomrail is facing up.
  3. Release the control end cap that covers the cordloop mechanism.
  4. Take a flat object, like a screwdriver, and gently insert it under the plastic strip colored the same as the headrail.
  5. Gently lift up this piece to pop it off of the lip. The control end cap should now slip off the cordloop mechanism.
  6. Remove the mechanism from the headrail. To do this you will need your screwdriver and a hammer.
  7. Use your screwdriver to remove the black end cap located on the tilt rod.
  8. Place the screwdriver in the left corner of the mechanism (mechanism is white) and take the hammer and gently tap the end of the screwdriver until the mechanism is free from the headrail.
  9. Slide the new cordloop mechanism into the headrail and onto the tilt rod. Replace and screw the black end cap back onto the tilt rod.
  10. Pop the control end cap back onto the end of the headrail.

Categories

 
close

We'd like to hear from you. Choose from the following:

 

If you require immediate assistance or product support,
please contact our customer service department.