feedback

Blind will not tilt/Slats will not turn

A guardian tilter continues turning even when the blind is fully closed preventing the mechanism from breaking. If the blind is small, there is a potential for disengagement. To re-engage the tilter, proceed as follows:

  • If the slats are closed in the down position, turn the wand counter clockwise and at the same time pull down gently on the back string of the ladders (supporting the slats).
  • If the slats are closed in the up position, turn the wand clockwise and gently pull down on the front string of the ladders.

If the above steps do not correct the problem, see replacing a tilter.

Categories

 
close

We'd like to hear from you. Choose from the following:

 

If you require immediate assistance or product support,
please contact our customer service department.