feedback

How do I eliminate gaps between butting blinds?

If there is a gap between butting blinds, you can create an overlap. To create an overlap, please do the following:

  1. Mount the headrails with non-control ends touching.
  2. Look inside the headrail and you will see several small whitish tubes attached at the ends (Note: The spacer tubes are c-shaped and can be popped off with a screwdriver).
  3. Remove one or more of these tubes which will allow that vane to move closser to the edge of the rail allowing for overlap.

Categories

 
close

We'd like to hear from you. Choose from the following:

 

If you require immediate assistance or product support,
please contact our customer service department.