feedback

measure for: inside mount cellular shades

  1. To find width: Measure exact distance between inside surfaces of window frame at the top, middle, and bottom, and use the narrowest width. Do not make any width deductions. For custom shades, the factory will automatically deduct 3/8" from the shade width; for Trim&Go shades, a 1/2" deduction will be taken on the entire shade.
  2. To find height: Measure exact distance from inside surface at top of window to sill. If you prefer shade not to touch sill, deduct 1/4". If there is no sill, measure height to point where shade is to reach.
 

measure for: outside mount cellular shades

  1. To find width: Measure exact distance between the outermost points where the shade is to be placed. This measurement should overlap each side of window frame by at least 1 1/2". Factory makes no deduction from your shade width dimensions.
  2. To find height: Measure exact distance from where top of shade will be located to top of sill. If there is no sill or if shade is to overlap window frame, measure to point shade is to reach.
 

measure for: inside mount 2-on-1 headrail

  1. To find overall shade width: Measure exact distance between inside surfaces of window frame at the top, middle, and bottom, and use the narrowest width. Order the narrowest measurement.
  2. To find left shade width: Measure the width that you want the left shade to cover. Order this shade first when placing your order.
  3. To find right shade width: Measure the width that you want the right shade to cover.
  4. To find height: Measure exact distance from inside surface at top of window to sill. If you prefer shade not to touch sill, deduct 1/4". If there is no sill, measure height to point where shade is to reach.
 

measure for: outside mount 2-on-1 headrail

  1. To find overall shade width: Measure the desired overall shade width. For maximum privacy, add an additional 3" to the total width.

  2. To find left shade width: Measure the width that you want the left shade to cover. Order this shade first when placing your order.

  3. To find right shade width: Measure the width that you want the right shade to cover.

  4. To find height: Measure the desired height. For maximum privacy, add an additional 3" to the total height.

 

critical dimensions

 

minimum mounting surface

  Headrail Dimensions
(Depth x Height)
Headrail Protrudes
(Side, Back or Top Mount)
Flush Mount Headrail
 
Corded Double Cell 2 1/8" x 9/16" 5/8" 2 1/2"
Corded Single Cell 1 7/8" x 9/16" 5/8" 2 1/4"
Cordless and Continuous Cordloop 1 7/8" x 1 3/8" 1/2" 2 1/8"
Trim&Go Cordless 3/4" x 1 1/2" 5/8" 1 7/8"

Use the above chart to verify that you have adequate window depth for mounting.

NOTE: If flush mount is desired, the headrail will not extend past the window frame into the room. Consider headrail size and brackets when installing flush mount.

 
 
close

We'd like to hear from you. Choose from the following:

 

If you require immediate assistance or product support,
please contact our customer service department.