feedback

Vertical Blinds Guide

Critical Dimensions | Cleaning and Care
Stacking Charts | Specialty Shapes

Dimensions and Installations Depth Requirements

   
Minimum Depth to Install 2 1/2"
Flush Mount Headrail 3"
Flush Mount Vanes 3 3/4"
Flush Mount DesignLine Valance 5"
Flush Mount Traditional Valance 6 1/4"
Flush Mount Transitional Valance 5 1/2"
Flush Mount Visions Valance 4 3/4"

Number of Installation Brackets and Valance Clips

Blind Width Number of Brackets Number of Valance Clips
Up to 66" 3 3
66 1/8" to 96" 4 4
96 1/8" to 126" 5 5
126 1/8" to 156" 6 6
156 1/8" to 186" 7 7
186 1/8" and above 8 8

Factory Deductions

  Inside Mount Outside Mount
Headrail 1/4" 0"
Height 1/4" 0"
Vane Only 1 3/4" 1 1/2"
 

Size Limitations

One Way Minimum Width Dual Stack Minimum Width Center Stack Minimum Width One Way, Dual, and Center Stack Maximum Width Minimum Height- Vinyl Minimum Height- Fabric Maximum Height
Inside Mount (IM) 13 3/8" 25 7/8" 48" 188 3/8" 8 3/4" 13 3/4" 144"
Outside Mount (OM) 13 1/8" 25 5/8" 48" 188 3/8" 8 3/4" 13 3/4" 144"
 

Control Length

Blind Height Cordless Wand Length
18" - 24" 12"
24 1/8" - 36" 20"
36 1/8" - 96" 33"
96 1/8" - 108" 47"
108 1/8" - 120" 59"
120 1/8" - 132" 69"
132 1/8" - 144" 80"

Length of cordless wand is from top of headrail

 
Blind Height Cord Length
Less than 19" 12"
19 1/8" - 96" 7" less than total length
Over 96" 90"

Tilt chain is standard 42" unless otherwise specified

 
Top
 

Cleaning and Care

Your Levolor Vertical Blind seldom requires cleaning because the vanes hang vertically. However, all products and furnishings get soiled due to condensation, humidity, smoke and steam.

 

Recommended Cleaning Methods

Fabric Vanes
Periodic dusting or vacuuming will keep the fabric fresh. Spot clean any stains by applying a mild soap and water solution with a sponge or cloth. Check color fastness first by cleaning an inconspicuous area of the vane. Do not machine wash or dry clean.

Vinyl Vanes
Apply a mild soap and cold or warm water solution with a soft cloth or sponge. Abrasive or strong cleaners may scratch or mar the vane's surface. Dry with a cloth towel to avoid water marks.

 

Color Variation

Replacement vanes may be ordered to replace damaged vanes or for a decorating change. When ordering, indicate the style of blind and the number of vanes needed. Specify Finished Blind Height (height of blind including headrail) or Exact Vane Length (length of a vane excluding the headrail).

Note: There is no guarantee of color match to the original order. Pricing for individual vanes is on the far right of each price grid.

Top
 

Stacking Charts

These charts represent the amount of shade that is gathered to either side of the window when fully drawn. The measurements in these charts include the stack of the fabric.

One Way Dual Draw
Blind Width No. of Vanes Stack Width Clear Opening No. of Vanes Stack Width Clear Opening
13-1/8" 4 3-7/8" 9-1/4" -- -- --
16-1/4" 5 4-1/8" 12-1/8" -- -- --
19-3/8" 6 4-1/2" 15" -- -- --
22-1/2" 7 4-3/4" 17-3/4" -- -- --
25-5/8" 8 5-1/8" 20-1/2" 8 3-7/8" 18"
28-3/4" 9 5-1/2" 23-1/4" -- -- --
31-7/8" 10 5-3/4" 26" 10 4-1/8" 23-5/8"
35" 11 6-1/8" 28-7/8" -- -- --
38-1/8" 12 6-1/2" 31-5/8" 12 4-1/2" 29"
41-1/4" 13 6-3/4" 34-1/2" -- -- --
44-3/8" 14 7-1/8" 37-1/4" 14 4-3/4" 34-3/4"
47-1/2" 15 7-1/2" 40" -- -- --
50-5/8" 16 7-3/4" 42-3/4" 16 5-1/4" 40-3/8"
53-3/4" 17 8-1/8" 45-5/8" -- -- --
56-7/8" 18 8-1/2" 48-3/8" 18 5-1/2" 46"
60" 19 8-3/4" 51-1/4" -- -- --
63-1/8" 20 9-1/8" 54" 20 5-3/4" 51-1/2"
66-1/4" 21 9-3/8" 56-7/8" -- -- --
69-3/8" 22 9-3/4" 59-5/8" 22 6-1/8" 57"
72-1/2" 23 10-1/8" 62-3/8" -- -- --
75-5/8" 24 10-3/8" 65-1/4" 24 6-1/2" 62-3/4"
78-3/4" 25 10-3/4" 68" -- -- --
81-7/8" 26 11-1/8" 70-3/4" 26 6-3/4" 68-1/4"
85" 27 11-3/8" 73-1/2" -- -- --
88-1/8" 28 11-3/4" 76-3/8" 28 7-1/8" 74"
91-1/4" 29 12-1/8" 79-1/8" -- -- --
94-3/8" 30 12-3/8" 82" 30 7-1/2" 79-1/2"
97-1/2" 31 12-3/4" 84-3/4" -- -- --
100-5/8" 32 13" 87-5/8" 32 7-3/4" 85-1/8"
103-3/4" 33 13-3/8" 90-1/4" -- -- --
106-7/8" 34 13-3/4" 93" 34 8" 90-5/8"
110" 35 14" 96" -- -- --
113-1/8" 36 14-3/8" 98-3/4" 36 8-1/2" 96-1/4"
116-1/4" 37 14-3/4" 101-1/2" -- -- --
119-3/8" 38 15" 104-3/8" 38 8-3/4" 101-7/8"
122-1/2" 39 15-3/8" 107-1/8" -- -- --
125-5/8" 40 15-3/4" 110" 40 9-1/8" 107-3/8"
128-3/4" 41 16" 112-3/4" -- -- --
131-7/8" 42 16-3/8" 115-1/2" 42 9-3/8" 113"
135" 43 16-3/4" 118-1/2" -- -- --
138-1/8" 44 17" 121" 44 9-3/4" 118-5/8"
141-1/4" 45 17-3/8" 123-7/8" -- -- --
144-3/8" 46 17-5/8" 126-1/2" 46 10" 124-1/4"
147-1/2" 47 18" 129-1/2" -- -- --
150-5/8" 48 18-3/8" 132-1/4" 48 10-3/8" 129-3/4"
153-3/4" 49 18-5/8" 135-1/8" -- -- --
156-7/8" 50 19" 138" 50 10-3/4" 135-3/8"
160" 51 19-3/8" 140-5/8" -- -- --
163-1/8" 52 19-5/8" 143-1/2" 52 11-1/8" 141"
166-1/4" 53 20" 146-1/4" -- -- --
169-3/8" 54 20-3/8" 149" 54 11-1/2" 146-1/2"
172-1/2" 55 20-5/8" 151-7/8" -- -- --
175-5/8" 56 21" 154-3/4" 56 11-3/4" 152-1/8"
178-3/4" 57 21-1/4" 157-1/2" -- -- --
181-7/8" 58 21-5/8" 160-1/4" 58 12-1/8" 157-1/2"
185" 59 22" 163" -- -- --
188-3/8" 60 22-1/4" 165-7/8" 60 12-3/8" 163-3/8"

Shade width in inches

Top

Specialty Shapes

Angle Top

Give the following dimensions: Straight Width, Angle Width, Right Height, Left Height, Mounting Style: Inside or Outside, Control Side: Right or Left

NOTE: Not all angle top headrails traverse. Check with customer service at time of order.

Cutout

Measure the following:

  1. The overall width of the blind
  2. The right height of the blind
  3. The left height of the blind
  4. The width of the obstacle

NOTE: Allow 1/4" clearance for the obstacle. The overall width of the obstacle plus the obstacle offset must equal the overall width. Maximum of two cutouts per blind.

Please send diagrams to:
Levolor Kirsch Window Fashions
Attention: Template OE
4110 Premier Drive
High Point, NC 27265

Be sure to indicate your name, store name, and purchase order number on the diagram.

 
Top
 
close

We'd like to hear from you. Choose from the following:

 

If you require immediate assistance or product support,
please contact our customer service department.