LEVOLOR stock blinds and shades can be custom cut in store by an associate, so you can get a better fit, light control and privacy.
Roller Shades are a stylish and functional window treatment with a variety of options. The compact style makes this product a great choice for layering with other window coverings. All shades have a cordless design for ease of use and perfect positioning. Solar shades are ideal for reducing heat and glare while providing an unobstructed outside view.
Easy to use and provides a safer option.
Suitable for any décor style.
Measure exact distance between inside surfaces of window frame at the top, middle, and bottom, and use the narrowest width.
Measure exact distance from inside surface at top of window to sill. If you prefer shade not to touch sill, deduct 1/4". If there is no sill, measure height to point where shade is to reach.
To install the product flush with the window frame, a minimum window depth of 3" is required.
Tip-to-Tip Measure is the common measure type for most roller shades. Choosing this measure type will include the headrail "pegs" that mount the shade to the wall or frame.
Measure exact distance between the outermost points where the shade is to be placed. This measurement should overlap each side of window frame by at least 1-1/2". Factory makes no deduction from your shade width dimensions.
Measure exact distance from where top of shade will be located to top of sill. If there is no sill or if shade is to overlap window frame, measure to point shade is to reach.
Cloth Measure is uncommon and should only be used for Outside Frame applications. The headrail is wider than the cloth of the shade which causes the "pegs" to extend beyond the width of the shade material. This total distance is 1-3/8" wide, or a gap of 11/16" on each side of the shade material.
|Allow Some Overlap|
For outside mount applications allow the shade to overlap 1-1/2" to 3" on the sides, top and bottom of the window.
You must add the overlap to your measurement; LEVOLOR does not add width or height for overlap on Outside Mounted shades.
Before installing shade, please read all instructions thoroughly.
Brackets can be used for either an inside or outside mount application (Fig. 1).
Clutch can be attached at either end of the shade to ensure maximum operation range, but must correspond with bracket. Before inserting clutch mechanism into roller tube:
Note: Clutch operates smoothly when covered part of clutch mechanism faces upward. To allow for maximum drop length, ensure that the beaded chain connector (on the clutch) is raised to the highest point at the rear of the clutch prior to inserting into roller tube (Fig. 2).
Insert clutch side of shade into square bracket hole and opposite side of shade into round bracket hole.